Installing the Icelett
When locating the Biolan Icelett, reserve sufficient space for use and maintenance of the unit, and ensure the supply of electricity. The toilet unit must not be attached to either the ventilation system or the sewer. The unit is placed on the floor. It is advisable to plan the composting of toilet waste or its disposal in some other way in connection with installation of the toilet unit.
Placing in the toilet space
The unit shall be installed in a warm space indoors. Installation of the toilet unit in a space with floor heating or in the immediate vicinity of a radiator or any other heat source is not recommended. Heat increases the unit's electricity consumption. Optimal room temperature is 10-22 degrees Centigrade.
The unit shall be installed on a level. For this purpose, it is equipped with legs that can be adjusted by turning.
When moved, the unit should be gripped at as low a point as possible.
Before use
Wait one hour before starting the unit, in order to allow the oil to return from the pipeline.
-
Check that the unit is in a horizontal position. If necessary, adjust the unit using its adjustable feet.
-
Press the bottom of the bag onto the bottom of the vessel, and fold the edges of the bag over the vessel's rim.
-
Put the vessel in place inside the unit. The vessel is properly in place, when the seat ring and the cover close well.
-
Plug in the unit and turn it on using the switch on the rear wall – the green signal light will illuminate.
-
The red signal light remains lit until the temperature inside drops to -12 °C, but the toilet can be used immediately.
